Regarding Nursing Motorcycle Tires

Tires are important devices that cover the circle of a wheel. Many important and fundamental thing to know about tires. Regarding maintenance, for tires remain durable and safe to drive.

How do I take care of the tires to be more durable and long lasting?
Here are some tips for caring for tires :
1. Check the air pressure and physical condition on a regular basis.
2. When using a standard motorcycle parked in the middle to reduce tire pressure in 
    the same position at a time when the old.
3. Avoid contamination with liquid - liquid chemicals that damage, oil and petrol  
    immediately wash with soap and water if the liquid.
4. Avoid contact with sunlight with a long time because it will make the characters  
    change the rubber tire.
5. For security reasons, replace the tires that had crossed the line TWI.

Tubeless tire pressure is reduced but not unreasonably nail punctured. What to do?
1. Check if the tire size of the wheels are in accordance.
2. Check valve against leaks replace it if necessary.
3. Check the lip wheels in contact with the tire if still smooth or has been damaged because of crooked, 
    chipped paint, no foreign objects, rough surfaces or other imperfections, repair / replace if necessary.
4. Check if ever patched tires, if so check its condition repair / replace tires if needed.
5. Check the condition of wheels against damage, if the wheels bent and pressed once again it is possible  
    cracked wheels so that wheels must be replaced.
6. Check if the rim is lined with a lip line wheels, fix its position if necessary.
 
How do I save a tire that is not used / mounted on the motor well?
1. Make sure the room is protected from the sun and UV rays.
2. Make sure that the room temperature maintained in order to avoid extreme temperature changes  
    continuously.
3. Storage should not be piled, should be established one by one.

In installing the tires there are a few things to watch out for the sake of safety among motorists and the durability of tires:
1.   Use equipment that does not damage the tire or wheel.
2.   Make sure the wheel rim parallel to the line when it is attached.
3.   Make sure the direction of play according to instructions.
4.   Check the air pressure to conform to its standards.
5.   Adjust the size of the tire inner tube outer.
6.   Make sure no foreign objects such as sharp gravel, glass or nails in tire.
7.   Always use the rim tape to protect the inner tube from puncture spoke alloy wheels.
8.   Make sure that the position "Valve" tires in accordance with a position "Valve" indicated on the tire.
9.   Tighten the nut ban in necessary.
10. After replacing the rear tires straight to align the position for the front tires to avoid rocking.
11. After the tire mounted brake lever pull a few times until you feel especially brake hydraulic brake 
      pressure is back to normal to avoid the occurrence of brake tension.